Intelligent Digital Amplifier
TS high performance switching power amplifier
The TThe TS series high performance amplifier provides the power density required for installation purposes while the powerful signal processing extends the level of functionality of the on-board features. The user interface of the amplifier consists a 4.3" color touchscreen providing comprehensive information of the device configuration and enhanced status monitoring.The user definable equalizer features two independent 16-band EQ groups within each channel. These provide parametric, notch, shelving and asymmetric filters as well as a graphic EQ (via the TS Remote control software). The delay capability covers a range of up to 10 s. All loudspeaker specific functions such as CUT, HFA, HFC, THC or CPL are available. Up to eight opto-coupled GPI pins (General Purpose Input) and up to four GPO pins (General Purpose Output) are available on Phoenix Euroblock connectors as additional digital control lines. This enables external control and detection functions. An additional 3-pin Phoenix Euroblock fault contact is provided allowing a general device error to be remotely indicated.For applicable loudspeakers, TS LoadMatch enables the 40D amplifier to electrically compensate for the properties of the cable used.The 40D utilizes a switch mode power supply with active Power Factor Correction (PFC) to produce a clean current draw and ensure stable and efficient performance under adverse mains conditions. The high power capabilities provide increased power to fully drive all applicable AUDIENCEDELIGHT loudspeaker cabinets and sufficient headroom for any future systems. Series can also perform efficient clipping/pressure limiting processing. When the cutting threshold is reached, the gain will slowly decrease to protect the horn.